Rimage Prism CDPR11 - Manual (Page 19)

Maintain the PrismPlus
Maintain the PrismPlus
General cleaning
Cleaning the exterior
Wipe the exterior of the printer with a lint free cloth.
Cleaning the printhead
Clean the printhead at every ribbon change, or more often if streaks start appearing or the ribbon
has torn.
This procedure requires the PrismPlus cleaning kit (PN 210555-001). This kit includes the
necessary cleaning pads and solution. Contact your local Value Added Reseller for the cleaning
kit.
1. Prepare the PrismPlus.
a. Power down the PrismPlus.
b. Remove the top cover.
c. Remove the ribbon. Refer to Changing the print ribbon on page 15.
d. While pressing the Operator button, power on the PrismPlus.
e. When the Disc Not Present LED flashes, release the Operator button.
2. Prepare the cleaning pad.
a. Remove the adhesive backing from the cleaning pad.
b. Adhere the cleaning pad to a disc.
3. Clean the printhead.
a. Place the cleaning pad with attached
disc on the tray.
b. Press the pad down over the sensor. Press Pad Down
ver The Senso O r
C
A
Press pad down
over the sensor
leaning Pad with
ttached CD
c. Place 5 drops of cleaning solution on
the cleaning pad.
Cleaning Pad
Cleaning Solution
Front Ribbon Guides
Cleaning pad with
attached disc
110635_G 13