Operate the prismplus, Setting up a standalone prismplus, Connecting the cables – Rimage Prism CDPR11 User Manual

Page 11: Operate the prism plus, Setting up a standalone prism plus

Operate the PrismPlus

Setting up a standalone PrismPlus

Use these procedures to step up a standalone PrismPlus printer.

Connecting the cables

1. Connect

the

parallel cable to the parallel cable connection at the back of the printer.

2. Connect the other end of the parallel cable to a parallel port on the back of the PC.

3. Connect

the

power cord to the printer.

4. Plug

the

power cord into a suitable electrical outlet.

Parallel Cable

Power Cord

110635_G