Rimage Prism CDPR11 - Manual (Page 12)

Rimage PrismPlus!
6 110635_G
computer is connected to a network, a Local or Network Printer dialog
Play printer checkbox.
splays.
g.
lect USB.
h. Select Next. The Select manufacturer and model dialog displays.
Installing the software
To install CD Designer, place the CD Designer disc in your PC disc tray and follow the prompts.
Installing the printer driver
You must install the driver for the PrismPlus before you can use the printer with any label editing
software.
This procedure describes how to install the printer driver for Windows 2000 and Windows XP.
Before you begin
If CD Designer is open, exit it.
-
Important! If the Windows Logo testing dialog box opens, select Continue Anyway.
1. Navigate to the print area settings.
• In Windows 2000, navigate: Start > Settings > Printers. The Printers dialog box opens.
• In Windows XP, navigate: Start > Printers and Faxes. The Printers and Faxes dialog box
opens.
-
Important! If you have an earlier version of the Rimage PrismPlus printer driver, delete it
before continuing.
2. Add the printer driver.
a. Select Add Printer
b. Select Next.
. The Add Printer Wizard dialog opens.
Note: If the
box opens.
c. Select Local Printer .
d. Clear the Automatically detect and install my Plug and
e. Select Next. The Select the Printer Port dialog di
f. Select the Use the following port radio button.
From the list of available ports, select the desired printer port .
• If the PrismPlus is being used as a standalone printer, select LPT1.
• If the PrismPlus is mounted on a Rimage Producer system, se