Radio Shack ET-1109 - Manual (Page 16)

16
Repeatedly press to view the
characters in alphabetical order.
(The display shows uppercase let-
ters first, then lowercase letters,
numbers, and special characters.)
Notes:
• Press to see the characters in re-
verse alphabetical order.
• You can hold down or to scroll
rapidly through the characters.
• If you make a mistake, move the
cursor over the error, then enter the
correct character, or press
DELETE
to delete a character. To delete all
the characters, hold down
DELETE
for at least 1 second.
6. Press SELECT . Store Number ap-
pears.
7. Enter the phone number and any
tone or pause entries (see “Using
Tone Services on a Pulse Line” on
Page 14 and “Entering a Pause” on
Page 17).
8. Press SELECT . The phone beeps
and Memory n Stored appears.
After 2 seconds, Memory Store
appears. Repeat Steps 3–8 to store
more numbers.
9. When you finish, press MEM to exit
the Memory Store display.
For each stored number, write the per-
son’s or company’s name next to the ap-
propriate location number on the
supplied memory directory sticker. Peel
the backing from the sticker and attach it
to the phone.
To replace a stored number, store a new
one in its place.
Editing or Deleting
a Number in Memory
Follow these steps to edit or delete a
memory number.
1. Lift the handset.
2. Hold down MEM until Memory
Store and a list of memory loca-
tion numbers appear on the display.
3. Choose a memory location ( 01-20 )
by pressing a number or by repeat-
edly pressing
or .
4. Press SELECT . A menu appears
with the three options listed below.
Press
or to highlight the de-
sired option then press SELECT to
choose it.
43-1109.fm Page 16 Friday, June 18, 1999 10:26 AM