Radio Shack ET-1109 - Manual (Page 15)

15
PAGING
To send a page from the base to the
handset or to locate the handset, when
the phone is not in use, press
PAGE/
FIND on the base. The handset beeps
for 5 seconds.
To locate the handset using a continu-
ous beep, press and hold
PAGE/FIND
longer than 5 seconds.
Press any key or place the handset on
the base to stop the page.
Note: The phone rings when a call
comes in while you are using the page
feature.
MEMORY DIALING
You can store up to 20 phone numbers
and names in memory, then dial a stored
number by entering its memory location
number.
Each number can be up to 20 digits, and
each name can be up to 13 characters.
Storing a Number
and Name in Memory
Notes:
• An error tone sounds and the phone
exits the storing process if you wait
more than 20 seconds between
each key press.
• If you receive a call during memory
entry, the phone exits the storing
process.
1. Lift the handset.
2. Hold down MEM until Memory
Store and a list of memory loca-
tion numbers appears.
3. Press a number ( 01 – 20 ) to choose a
two-digit memory location. Precede
a single digit location number with 0
–
01 , 02 , 03 , and so on.
4. To store a name, press SELECT .
Store Name appears.
If you do not want to enter a name,
skip to Step 6.
ap-
pears to identify the number (n is the
location number you selected).
5. To enter a name, press or to
select the characters and or
to move the cursor.
T A L K
M E M
F L A S H
43-1109.fm Page 15 Friday, June 18, 1999 10:26 AM