Radio Shack ET-1109 - Manual (Page 11)

11
Follow these steps to turn auto talk on or
off.
1. Lift the handset and hold down
CALL ID . A menu appears with 1
Auto Talk selected.
2. Press SELECT to change the auto
talk setting. On or Off appears indi-
cating the selected setting.
3. Return the handset to the base or
press CALL ID to store the new set-
ting.
TURNING CALLER ID/
CALL WAITING ON/OFF
If you subscribe to Call Waiting with
Caller ID service, you can set the ET-
1109 to show Caller ID information for
an incoming call even while you are us-
ing the phone.
Follow these steps to turn the Caller ID/
Call Waiting feature on or off.
1. Lift the handset and hold down
CALL ID .
2. Press 2 or to select 2 CIDCW:
(Caller ID/Call Waiting).
3. Press SELECT to change the Caller
ID/Call Waiting setting. On or Off
appears indicating the selected set-
ting.
4. Return the handset to the base or
press CALL ID to store the new set-
ting.
STORING YOUR
AREA CODE
To quickly dial a number from a Caller
ID record (see “Dialing Numbers from a
Caller ID Record” on Page 20) or to cor-
rectly store a number from a record into
a memory dialing location (see “Storing
a Caller ID Record to Memory” on
Page 20), you must store your local area
code in the ET-1109’s memory. Then,
when you dial from a Caller ID record,
the ET-1109 skips the area code if it
matches the one you stored.
Follow these steps to store your area
code.
1. Lift the handset and hold down
CALL ID .
2. Press 3 or to select 3 Area
Code: .
CALL ID
43-1109.fm Page 11 Friday, June 18, 1999 10:26 AM