beautypg.com

Operation – RIDGID JP06101 User Manual

Page 27

background image

27

�

OPERATION

SETTING THE FENCE FOR A 135° BEVEL STOP

See Figure 37.
n

Loosen bevel lock handle.

n

Flip the 90° stop bar out of the way and move the fence

until it contacts the 135° stop.

n

Make sure fence is tight against the stop and check the

angle using the included angle gauge.

n

Using the angle gauge, set the fence at 135° to the outfeed

table and tighten the bevel lock handle.

n

Loosen the jam nut on the 135° stop screw.

n

Turn the stop screw so it touches the stop. Tighten the

jam nut.

n

Loosen the bevel lock knob.

n

Move the fence to any angle and then return it to the

index. Check for accuracy with the angle gauge.

Fig. 37

FENCE LOCK

KNOB

BEVEL LOCK

HANDLE

ANGLE

GAUGE

135° STOP

SCREW

FENCE

See also other documents in the category RIDGID Tools: