Assembly – RIDGID JP06101 User Manual

Page 17

ASSEMBLY

ASSEMBLING JOINTER TABLE TO CABINET

See Figures 15 - 16.

WARNING

This tool is heavy. To avoid back injury, lift with your
legs, not your back, and get help when needed.

With help place the bed assembly upside down on two

blocks as shown.

Place the cabinet on top of the bed assembly as

shown.

Locate the following:

Serrated Hex Head Bolts (3), 3/8-16 x 3/4 in.
n

Line up the holes in jointer table with the holes in the

cabinet.

Bolt the jointer table to the cabinet using hex head bolts

and tighten all the bolts. To access third bolt, reach into
dust collection port on left side.

ASSEMBLING SWITCH

See Figure 17.
n

Locate the following:

Switch Key (1)
Screws (2), 3/16 in.
n

Using 3/16 in. screws, mount the switch into place as

shown. Make sure the switch is right side up.

Install switch key into switch.

Fig. 15

Fig. 17

Fig. 16

BED ASSEMBLY

JOINTER CABINET

HEX HEAD

BOLT

SWITCH

SCREW

BED ASSEMBLY

4 X 4'S