Roland HP103 User Manual

Page 27

Chapter 2. Performance

Splitting the Keyboard Into Two
Sections for Four-Hand Performances

(Twin Piano Mode)

You can divide the keyboard into two separate sections, allowing two people to

perform in the same registers.

While holding down the [Split] button and press the [Piano] button.

The [Split] button’s indicator will light, and Twin Piano Mode is switched on.

fig.panel3-1

The following occur when Twin Piano Mode is switched on:

• The keyboard is divided into two separate sections, and the pitch

changes.

• The right pedal now functions as the damper pedal for the right

keyboard section, and the left pedal functions as the damper pedal for
the left keyboard section.

• The center pedal now functions as the Sostenuto pedal for the right

keyboard section.

• If recording is in progress or the instrument is in recording standby,

recording is stopped or recording standby is cancelled. The [Rec] button
is disabled while Twin Piano Mode is active.

• If the Split function happens to be on, it is switched off.

• The same tone and effects are used on both the left and right sides. If the

piano is in Split Play before switching Twin Piano Mode on, then the
tone selected for the right hand in Split Play is used.

* The damper resonance function is not operational in Twin Piano Mode.

To exit the function, press the [Split] button.

HP103_e.book 27 ページ２００５年３月２４日　木曜日　午後４時５８分