RCA DRD212NW - Manual (Page 48)

46
Connecting the DSS Receiver
Connection D (Good Picture and Sound Quality)
To use this connection you must have:
• TV with RF input
• Coaxial cables
To connect TV and antenna or cable box:
1. Connect coaxial cables as shown.
To receive DSS programming:
1. Set DSS receiver 3/4 switch to CH3 or CH4
(whichever is not being broadcast in your area.)
2. Tune TV to whichever channel you set the DSS receiver 3/4
switch to in the previous step.
3. Tune DSS to desired channel.
To receive off-air programming (no cable box):
1. Turn DSS receiver off (or press TV/DSS button).
2. Tune TV to desired channel.
To receive cable programming (with cable box):
1. Turn DSS receiver off (or press TV/DSS button).
2. Tune TV to cable box output channel
(usually CH2, CH3, or CH4).
3. Tune cable box to desired channel.
Note: You can use your stereo amplifier line input to hear stereo using this connection. See
your stereo amplifier’s Owner’s Manual for specific information.