RCA DRD212NW - Manual (Page 42)

40
Connecting the DSS Receiver
Connection A (Best Picture and Sound Quality)
To use this connection you must have:
• TV with separate RF, audio/video, and S-Video inputs (jacks)
• VCR with RF and audio/video inputs
• Coaxial, audio/video, and S-Video cables
To connect TV, VCR and antenna or cable box.
1. Connect coaxial cables as shown.
2. Connect audio/video cables as shown.
3. Connect S-Video cable as shown.
To receive DSS programming:
1. Tune TV to receive the S-Video output from the DSS receiver.
2. Tune DSS receiver to desired channel.
To receive off-air programming (no cable box):
1. Turn VCR off or press TV/VCR button.
2. Tune TV to desired channel.
To receive off-air programming (with cable box):
1. Turn VCR off or press the VCR’s TV/VCR button.
2. Tune TV to cable box output channel
(usually CH2, CH3, or CH4).
3. Tune cable box to desired channel.
To record DSS programming:
1. Tune TV to receive S-Video output from DSS receiver.
2. Tune DSS receiver to desired channel.
3. Set your VCR to record on line input. (See your VCR Owner’s
Manual for more information.)
To view VCR programming:
1. Tune TV to VCR output channel (usually CH3 or CH4).
.