RCA DRD212NW User Manual
Page 44
42
Connecting the DSS Receiver
Connection B (Very Good Picture and Sound Quality)
To use this connection you must have:
• TV with separate RF and audio/video inputs (jacks)
• VCR with RF and audio/video inputs
• Coaxial and audio/video cables
To connect TV, VCR and antenna or cable box.
1. Connect coaxial cables as shown.
2. Connect audio/video cables as shown.
To receive DSS programming:
1. Tune TV to receive line output from DSS receiver
(often called Input 1).
2. Tune DSS receiver to desired channel.
To receive off-air programming (no cable box):
1. Turn VCR off or press VCR’s TV/VCR button.
2. Tune TV to desired channel.
To receive off-air programming (with cable box):
1. Turn VCR off or press VCR’s TV/VCR button.
2. Tune TV to cable box output channel (usually CH2, CH3, or
CH4).
3. Tune cable box to desired channel.
To record DSS programming:
1. Tune TV to record line output from DSS receiver
(often called Input1).
2. Tune DSS receiver to desired channel.
3. Set your VCR to record on line input.
To view VCR programming:
1. Tune TV to VCR output channel (usually CH3 or CH4).
.