Roland SH-201 - Manual (Page 12)

12
Before you begin
921
* To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power
on all devices before making any connections.
Connect the included AC adaptor (PSB-1U) to the DC IN jack located on the SH-201’s rear panel.
924
* To prevent the inadvertent disruption of power to your unit (should the plug be pulled out accidentally), and to avoid
applying undue stress to the AC adaptor jack, anchor the power cord using the cord hook, as shown in the illustration.
Making the connections
Connecting the power adaptor
AC Adaptor
To the Power Outlet
Cord Hook
The cord of
the supplied
AC Adaptor
SH-201_r_e.book 12 ページ ２００６年４月２７日 木曜日 午前１１時２８分