Radio Shack 43-3557 - Manual (Page 21)

Memory
Diali
n
g
21
• Use PAUSE/REDIAL to enter a pause
in the dialing sequence. The display
shows a ¨
P ¨. Each pause counts as
one digit and represents a two
second delay of time between the
digits. Ô
• Use CH/DELETE to delete digits as
needed.
8. Press MEM or SELECT . You will hear a
confirmation tone. Memory storage is
complete. For example, if you store a
name and number into memory
location number 01, the display shows
¨
Memory01 Stored ¨.
After about two seconds, the Select
Memory screen is displayed.
Repeat steps 2 - 8 to store more
numbers.
9. Press END to return to the standby
mode.
S
TEPS FOR
E
NTERING
N
AMES
AND
S
PECIAL
C
HARACTERS
Refer to the letters on the number keys to
select the desired characters.
With each press of a numeric key, the
displayed character appears in the following
order: Upper case letters first, lower case
letters next and finally the number
corresponding to the key. Ф
Ф
NOTE
Ô
The pause feature is useful
for long distance calling,
credit card dialing, or
sequences that require a
pause between digits.
Ô
NOTE
Ô
If the next character uses
the same number key, you
must press #/> to move the
cursor over. Otherwise the
next time you press the
number key, it changes the
character that was
previously set.
43-3557.book 21 ページ ２００３年１２月１７日 水曜日 午後４時５４分