Radio Shack 43-3557 User Manual

Page 17

Operation

ETTING

ENU

PTIONS

There are five setup options available. They
are Auto Talk, CIDCW (Caller ID on Call
Waiting), Area Code, Dial Mode and
Language.

Auto Talk allows you to answer the phone
without pressing the

TALK/FLASH

button.

If the phone rings when Auto Talk is On,
simply remove the handset from the base
and the phone automatically answers the
call. If the phone rings when Auto Talk is
Off, you must press

TALK/FLASH

to answer

the call. Ô

Changing the Auto Talk and

CIDCW

1. Press and hold

CID

2. Use

VOL

keys to move the

pointer to the selection that you would
like to change. Press

SELECT

to toggle

between ¨

¨ and ¨

Off

¨ for Auto Talk

and CIDCW.

3. Press

END

and return the handset to

the base unit to complete the setting.
The handset returns to the standby
mode.

Entering Your Area Code

If you enter a three-digit area code number
in the Area Code option, your local area
code does not appear in Caller ID
messages. Do not program this option if
your calling area requires ten-digit dialing.
When reviewing Caller ID messages, you
will see only the local seven digit number.
For calls received from outside your local
area code, you will see a full ten-digit
number.

NOTE

The Cordless phone
features include Auto Talk

and Auto Standby. Auto
Talk allows you to answer a
call by just removing the
handset from the base so
you don’t have to waste
time pushing buttons. Auto
Standby allows you to hang
up by simply returning the
handset to the base.

NOTES

Area Code
When the area code has
already been stored in
memory, the stored area
code will be displayed. To
change it, use the CH/
DELETE and number keys
to enter the new area code.
Then press SELECT. A
confirmation tone sounds.
To complete the setting,
press END or return the
handset to the base unit.

Choosing the Dialing
Mode
Make sure your battery
pack is fully charged
before choosing the dialing
mode.

43-3557.book 17 ページ２００３年１２月１７日　水曜日　午後４時５４分