RCA TruFlat BD20TF10 - Manual (Page 75)

Chapter 5 73
Using the TV’s Menu System
Turning off Closed-Caption
1. Select Screen from the Main menu.
2. Press OK to select Closed-Caption Display.
3. Highlight Off Always and press OK. The closed captioning is turned off and
you go back to the Screen menu.
Channel Menu
Auto Channel Search When in TV mode, searches automatically for all the
channels available through the antenna input. When the TV finds an active
channel, it places it in the Normal channel list; inactive channels (weak stations
or channels with no signal at all) will be removed from the channel list. If you
are using a cable box and have set up the GUIDE Plus+ system, this option
does not appear.
List and Labels Displays a control panel that lets you edit your Normal
channel list and choose a six-character label for each channel. Follow the on-
screen directions to enter your channels and other information.
Channel # Use the up and down arrows to scroll up and down through
the channels available via your antenna. You can enter the channel number
directly using the number buttons.
Normal List Only the channels included in the Normal list are available
when you scan up and down using channel up and down. Use the up and
down arrow buttons to indicate whether the channel number indicated is
included (Yes) or is not included (No) in the Normal channel list.
Channel Label Use the up and down arrow buttons to enter a six-
character label for each channel. Hold the button down to scroll quickly
through the characters. The TV can store up to 27 labels in memory.
Auto Tuning Displays a choice list that lets you set up the TV to automatically
tune to the correct input channel when you press a component button (VCR1,
VCR2, or SAT•CABLE) on the remote. Go to Chapter 3 for details about the
Auto Tuning feature.
Video Input Source Lets you select whether or not you have used the S-Video
jack to connect a component. If you are using the S-Video jack in this way,
select S-Video Input. If not, select Video Input.
TV MAIN MENU
1 Audio
2 Picture Quality
3 Screen
4 Channel
5 Time
6 Parental Controls
7 GUIDE Plus+ Menu
8 Setup
0 Exit
CHANNEL
1 Auto Channel Search
2 List and Labels
4 Video Input Source
0 Exit
3 Auto Tuning
Tip
To enter a number greater than 99, press and hold
“1” to enter the hundreds digit, then press the two
remaining numbers.