RCA TruFlat BD20TF10 - Manual (Page 25)

Chapter 1 23
Connections & Setup
ON•OFF Turns the TV/DVD on and off.
PAUSE In DVD mode, press PAUSE when the disc is playing to pause playback.
PLAY In DVD mode, plays the disc.
REC•VCR+ In TV mode, when the GUIDE Plus+ program guide is on the
screen, press REC•VCR+ to program your VCR to record a program.
REVERSE In DVD mode, press REVERSE to go backwards on a disc.
SAT•CABLE In TV mode, puts the remote in SAT•CABLE mode.
SKIP In TV mode, if you press this button before you change the channel, the
TV waits 30 seconds and automatically goes back to the original channel. Each
time you press SKIP, you add 30 seconds (i.e, if you press SKIP two times before
you change the channel, the TV waits 60 seconds and automatically turns back
to the original channel).
SOUND In TV mode, displays the AUDIO PROCESSOR menu.
STOP In DVD mode, stops playing the disc.
TV Turns on the TV and puts the remote in TV mode. Also displays channel
information.
VCR1 Puts the remote in VCR mode.
VCR2 Puts the remote in VCR mode.
VOL (up and down) buttons Decrease or increase the TV/DVD’s volume.
WHO•INPUT In TV mode, press WHO•INPUT to toggle through the available
Video Input channels (VID/FRNT and the current channel). In SAT mode, press
to select available channel lists.
Tip
To turn off all the RCA, GE, and Proscan
components that are connected to the
TV/DVD, press ON•OFF twice within two
seconds.
This feature only works with most RCA,
GE and Proscan products.