Nortel Networks BST Doorphone - Manual (Page 5)

5
BST Doorphone Installation and Configuration Guide
Chapter 1
About the Business Series Terminal (BST) Doorphone
This guide leads a Nortel installer and/or system administrator through installing and configuring a
BST Doorphone on a Business Communications Manager (BCM) system.
The BST Doorphone is used as an intercom device to control access to your building. It provides
call notification and handsfree communication from a site entry location to assigned telephones on
the BCM system.
This chapter contains:
• “What you need to know”
• “Environment requirements”
• “How to get help”
What you need to know
To install and configure a BST Doorphone you must:
• know how to log on to Element Manager and use the Element Manager interface
• be a Nortel installer with Business Communications Manager certification
• know basic Nortel terminology
Environment requirements
Check the following environment requirements:
Note: Door opening capabilities are available with a Door Opening Controller (DOC).
For more information on DOC, refer to
“Optional Equipment” on page 13 .
Temperature -35° to 60°C (-31° – 140°F)
Relative humidity 5% to 95% non-condensing
Background noise up to 70 dB A