NEC uPD78056Y - Manual (Page 485)

485
CHAPTER 21 INTERRUPT AND TEST FUNCTIONS
Table 21-1. Interrupt Source List (2/2)
Interrupt Source
Name Trigger
Reference time interval signal from
watch timer
Generation of 16-bit timer register,
capture/compare register (CR00)
match signal
Generation of 16-bit timer register,
capture/compare register (CR01)
match signal
Generation of 8-bit timer/event
counter 1 match signal
Generation of 8 bit timer/event
counter 2 match signal
18 INTAD End of A/D converter conversion 0028H
Software — BRK BRK instruction execution — 003EH (E)
Interrupt
Type
Default
Priority Internal/
External
Vector
Table
Address
Basic
Configuration
Type
Note 1 Note 2
14 INTTM00 0020H
15 INTTM01 0022H
17 INTTM2 0026H
13 INTTM3 001EH
Notes 1. Default priorities are intended for two or more simultaneously generated maskable interrupt requests.
0 is the highest priority and 18 is the lowest priority.
2. Basic configuration types (A) to (E) correspond to (A) to (E) of Figure 21-1.
16 INTTM1 0024H
Maskable Internal (B)