Nortec MH Series - Manual (Page 13)

10-00
Page 9
2008-12-03
3.2 EXPLANATION OF UNIT INFORMATION
Path: Main menu > Info > Unit Status
Press <> and <> keys, in order to select the unit information
available in the list:
– System Operation Hour:
Total operating hours of the control unit (unit on) since the initial
commissioning of the unit.
– Relay Humidity:
Actual status of the remote indication relay “Humidify”.
– Relay Service:
Actual status of the remote indication relay “Service”.
– Relay Error:
Actual status of the remote indication relay “Error”.
– Relay Unit On:
Actual status of the remote indication relay “Unit on”.
– Drain Valve:
Actual operating status of the drain valve.
– Inlet Valve:
Actual operating status of the inlet valve.
– Pump:
Actual operating status of the circulation pump.
– UV Lamp:
Actual operating status of the UV lamp
– Stage 1 Valve: Actual operating status of the step valve 1
– Stage 2 Valve: Actual operating status of the step valve 2
– Stage 3 Valve: Actual operating status of the step valve 3
– Pressure Sensor (MHTC Flow only):
Actual operating status of the minimum pressure switch
– Max Level Sensor (MHTC Reflow only):
Actual operating status of the minimum level sensor
– Thermal Contact (MHTC Reflow only):
Actual operating status of the thermal contact (pump motor
protection)
– Extension Present:
Indication, whether or not a unit extension is present.
– Wash Demand:
Actual status of the external demand triggering a wash cycle.
Press the key several times to quit the information list
and to return to the standard operating display.