Nortec MH Series - Manual (Page 10)

10-00
Page 6
2008-12-03
3. EXPLANATION OF CONFIGURATION SETTINGS
3.1 EXPLANATION OF THE STATUS INFORMATION (INDICATION STATUS)
In normal operation mode the control un it is in the status level. The status level forms a loop
that includes several pages holding operating information which can be accessed with the
arrow keys. The various displays of the status level are shown below.
Standard operating display
The appearance of the standard operating display depends on the actual operating status and
the configuration of the Nortec MH
Standard operating display with external control via the
external controller.
Standby (no humidity demand) or Demand % (humidity
demand present).
Standard operating display with internal control.
- Actual humidity in %rh.
- Configured humidity setpoint in %rh.
Info Page: Settings
- Software version.
- Selected control signal source.
- Configured control signal range.
- Configured Modbus address of the unit.
Info Page: Performance data
- Configure power limitation in % of the maximum output.
- Actual output unit A in kg/h.
- Actual total output in kg/h (the same as Capacity A unless a
second module is connected to control unit).
.
Info Page: Operating hours
- Total operating hours of the Nortec MH.
- Remaining operating hours to the next maintenance.