NEC NX7700i - Manual (Page 94)

Base Module
855-900549 2-75
2.4.6.11. RS (Cold Reset System)
m b u
X
* The command is executable to the active partition (after automatic system boot/UP
command execution).
Function:
This command causes the system to be cold-reset.
Note that this command could reset the system while the OS (BIOS) is running, notifying
nothing to the software.
Partitions that are already off or those being shut down are not the target of this command.
(Screen Example)
Description
No.
(a)
(b)
(c)
(d)
(Description)
Description
No.
Description
(a)
Prompts a partition number.
If “all” is specified, all the existing partitions are the target of this command.
(b)
Enter y at this confirmation message if you are sure to continue command
execution.
(c)
An “RS command accepted” message appears.
The actual processing progresses in the background.
(d) Shows the progress in the background.