NEC NX7700i - Manual (Page 33)

Base Module
855-900549 2-14
2.3. Consoles
The base module contains console interfaces as standard equipment. The consoles connected
to the interfaces provided by the iSP are roughly classified into two:
• OS console (also called the system console or SW console) to display BIOS/OS messages
• SP console (also called the HW console) to display SP messages
2.3.1. SP Console
The SP console required:
• Recommended Windows2003 operation environment
• One LAN port
The console connection diagram is shown in the subsequent page. The iSP-C standard I/O
interface connected to “Console PC” in this figure is:
• Ether Port (10/100Base-TX)