NEC NX7700i - Manual (Page 16)

NX7700i/5020M-16 System Overview
855-900549 1-4
Table. Base Module Specifications
BASE MODULE
Cell (Max. 2 cells can be installed in the base module.)
CPU
Max. No. of processors 8 (Max. 4 processors/cell)
Main memory
Expansion unit 2GB/4GB/8GB
Main memory capacity 2GB to 128GB
I/O module (Max. 2 modules can be installed.)
Max. No. of PCI slots 16 slots (133MHz)
Max. I/O bandwidth 67GB/s
DVD-ROM unit
One unit can be installed in the I/O module.
DVD-ROM/CD-ROM mode
DAT unit
One unit can be installed in the I/O module.
DDS-4 4mm DAT unit
Magnetic disk unit
Max. 4 units can be installed in the I/O module (2 units when
DAT is installed).
Selection from 73GB/146GB/300GB
POWER BAY (One unit can be installed in the base module.)
DPS (Max. 3 units can be installed.)
Note) Components are installed in the cabinet in units of the base module (an expansion
power bay will be mounted depending on the form of power supply). A maximum of four
base modules can be installed in a cabinet.
The expansion power bay is mounted under the base module when power is supplied
from two systems or 100VAC. It depends on the form of power supply.