NEC NX7700i - Manual (Page 5)

iv
Handling of the laser product
A laser product of Class 1, Subchapter J, Chapter 1 of JIS C6802, EN60825, IEC825 and FDA21CFR, is
used for this equipment.
Note) Class 1 lasers are defined in JIC6802, EN60825, IEC825 and FDA 21CFR that they are exempt
lasers or laser systems that cannot, under normal operating condition, produce a hazard, and the
following label is attached to this class of laser product:
CLASS 1 LASER PRODUCT PER IEC825
LASER KLASSE 1 NACH IEC825
PRODUCTO LASER DE CLASE 1
Complies with 21CFR chapter 1, Subchapter J
Disposing/collecting/recycling the equipment
Contact the sales personnel of NEC before disposing, collecting, or recycling
the equipment.
The labels listed below are attached to the cabinet of this system.
Read the explanation of each label carefully before operating the system.
133–300656–GRP MARKINGS
001
031
WARNING:See operation Manual for a List of
Equipment to be used with the rack.
AVERTISSEMENT:Vo yez au mode d'e mploi fourni,
pour un liste des materie ls quels peuvent
utilise r avec l'appa reil.
033 ,
WARNING:Confirm there is sufficient output
voltage of power distribution from the outlet
box before mounting units.
AVERTISSEMENT:Avant la installation des
materiels, confirmez que la tension de sortie au
socle de raccordement au reseau est suffisante.
103