NEC NX7700i - Manual (Page 93)

Base Module
855-900549 2-74
2.4.6.10. PC (Power Cycle)
m b u
X
* The command is executable to the active partition (after automatic system boot/UP
command execution).
Function:
This command is used to cycle system power (system reboot after system DC power off).
Note that this command shuts off system power without regard to the current OS or BIOS status
or notifying nothing to the OS or BIOS.
Partitions that are already off or those being shut down are not the target of this command.
(Screen Example)
Description
No.
(a)
(b)
(c)
(d)
(Description)
Description
No.
Description
(a)
Prompts a partition number.
If “all” is specified, all the existing partitions are the target of this command.
(b)
Enter y at this confirmation message if you are sure to continue command
execution.
(c)
A “PC command accepted” message appears.
The actual processing progresses in the background.
(d) Shows the progress in the background.