NEC NX7700i - Manual (Page 55)

Base Module
855-900549 2-36
2.4.6.3. DP (System Dump)
m b u
X
* The command is executable to the active partition (after automatic system boot/UP
command execution).
Function:
This command causes a Dump interrupt to the system after a system dump is taken.
Whether a system dump is actually taken or not, or a system reset is subsequently activated or
not, depends on the system software (OS or BIOS). This command only causes a Dump
interrupt.
Nothing will happen, of course, if the software is not running.
(Screen Example)
Description
No.
(a)
(b)
(c)
(d)
(Description)
Description
No.
Description
(a)
Enter the target partition number here.
If “all” is specified, all the existing partitions are the target of this command.
(b)
A confirmation message appears.
If you are sure to continue command execution, enter “y.”
(c)
A “DP command accepted” message appears.
Actual processing progresses in the background.
(d) Shows progress in the background.