Connecting to a hotwire 8600 dslam via telnet – Nortel Networks HotWire 8600 User Manual

Page 44

Text mode
Original mode

Installing and Connecting the Hardware

2-28

8600-A2-GN20-20

October 1997

Connecting to a HotWire 8600 DSLAM Via Telnet

You can connect to a HotWire 8600 DSLAM via a telnet session from either a
workstation or PC that has access to the Management Domain LAN.

Procedure

If you are using a Solaris 2 or SUN OS 4 workstation:

1. Execute a window manager program, such as OpenWin.

2. Execute a terminal emulator program.

3. Set terminal type to VT100.

4. Establish a telnet session by issuing the telnet command and providing the

Management Domain IP address for the MCC card on the command line.

If you are using a PC, establish a telnet session by issuing the telnet command
and providing the Management Domain IP address for the MCC on the command
line.

See

Chapter 3

for IP address information.