Installation, Selecting a bus, Selecting an operating standard – Nokia 6800 Series User Manual
Page 144: Selecting a bus selecting an operating standard
6800/7000 Series - Distribution and Routing Products Installation and Operation Manual
117
Installation
Chapter 14: VSR-4041 Serial Video Router Module
Installation
This module can be installed in any slot of the FR-7001, FR7000MB MIX
BOX, or FR-680X series of mounting frames. When housed in an
FR-7001 or FR7000MB frame, the appropriate back module must be
used.
Figure 14-1.
VSR-4041-M Back Module
Selecting a Bus
The following jumpers should be set to select the different options.
Selecting an Operating Standard
VSR-4041-M
1
1
2
2
3
4
OUTPUTS
INPUTS
CONTROL
Jumper
Bus
J1 or none
Bus 1
J2
Bus 2
J3
Bus 3
J4
Bus 4
Jumper
Standard
J5
Auto
J6
360
J7
270 (D1)
J8
177 (D2 PAL)
J9
143 (D2 NTSC)
When Auto is selected, it will
cycle through all the
standards before selecting
the correct standard. If the
system operates on a single,
known standard, it is
recommended that the user
select that standard.