Nokia 3220 - Manual (Page 43)

36 Copyright © 2004 Nokia
Time and date settings
Select Menu > Settings > Time and date settings, and one of the following:
Clock—Set the phone to show the clock in the standby mode, adjust the clock,
and select time zone and format.
Date—Set the phone to show the date in the standby mode, set the date, and
select the date format and separator.
Auto-update of date & time (network service)—Set the phone to automatically
update the time and date according to the current time zone.
Call settings
Select Menu > Settings > Call settings, and one of the following:
Automatic volume control—Set the phone to automatically adjust the speaker
volume according to the background noise.
Call forwarding (network service)—Forward your incoming calls. For details,
contact your service provider.
Anykey answer—Select On; to answer an incoming call, briefly press any key
except the Power key, the End key, or the Right and Left selection keys.
Automatic redial—Select On; your phone will make a maximum of 10 attempts
to connect the call after an unsuccessful call attempt.
1-touch dialing—Select On; to dial the names and phone numbers assigned to the
1-touch dialing keys from 2 to 9, press and hold the corresponding number key.
Call waiting—Select Activate for the network to notify you of an incoming call
while you have a call in progress (network service).
Summary after call—Select On; the phone briefly displays the approximate
duration and cost (network service) of the call after each call.
Send my caller ID (network service)—Select Set by network, Yes, or No.
Line for outgoing calls (network service)—Select phone line 1 or 2 to make calls.
This option is shown only if supported by your SIM card.
Phone settings
Select Menu > Settings > Phone settings, and one of the following:
Phone language—Set the display language of your phone. If you select Automatic,
the phone selects the language according to the information on the SIM card.
Automatic keyguard—Set the keypad of your phone to lock automatically after a
preset time delay when the phone is in the standby mode and no function of the
phone has been used. Select On, and set the time from 5 seconds to 60 minutes.
When the keyguard is on, calls still may be possible to the official emergency
number. Enter the emergency number, and press the Call key.
Cell info display—Select On to receive information from the network, depending
on the network cell used (network service).