Nortel Networks T1 - Manual (Page 46)

3G Travel Router t1 User Guide YMLT1WN
46 www.netcomm.com.au
5. To use WPA-PSK/WPA2-PSK, please configure the following:
• Change Security to WPA-PSK or WPA2-PSK
• Change Encryption Type to TKIP for WPA-PSK or AES for WPA2-PSK
• Enter the WPA/WPA2 key in the Passphrase field.
Notes: The key needs to be more than 8 characters and less than 63 characters and it can be any combination of letters and numbers.
• Click Apply to save the settings
Notes: Wireless client network cards must be WPA-compliant to connect to a WPA enable network, if in doubt check the wireless client network card documentation, or use WEP
security.
Notes: After changing the security settings, you might need to remove the current wireless settings on the computer and reconfigure the wireless computer according to the new
settings.