Nortel Networks T1 - Manual (Page 25)

YMLT1WN 3G Travel Router t1 User Guide
www.netcomm.com.au 25
NetComm Liberty Series - 3G Travel Router t1
Basic
This page allows you to define the basic wireless settings for this device such as the SSID and channel.
Name Description
Radio On/Off: On by default. Changing this option to Off will turn off the wireless feature on the unit and you will not be able to
connect to your 3G Router wirelessly.
Network Mode: You can select which wireless standards are able to connect to your wireless network:
11b/g mixed mode: Both 802.11b and 802.11g wireless devices are in your network.
11b only: Select this if all of your wireless clients are 802.11b.
11g only: Select this if all of your wireless clients are 802.11g.
11n only: Select this if all of your wireless clients are 802.11n.
11/b/g/n mixed mode: Select this if 802.11b and 802.11g and 802.11n wireless devices are in your network.
Network Name (SSID): The SSID (Service Set Identifier) is the name of your wireless network. Use a unique name to identify your wireless
network so that you can easily connect from your wireless clients. This field is case sensitive and can be up to 32
characters. You should change the default SSID for added security.
Frequency (Channel): This setting configures the frequency that the Wireless Radio uses for wireless connectivity. Select one channel
that you wish to use from the drop down list.
Click Apply to save the settings.