Nortel Networks T1 - Manual (Page 16)

3G Travel Router t1 User Guide YMLT1WN
16 www.netcomm.com.au
3G Internet Settings
• Click Apply to save the settings
• If everything is configured properly, the Status page will show that your 3G service is online and the WAN IP address that has been
assigned.
3G Connection Status Page
APN (Access Point Name) for various providers
ISP APN Username/Password Required
Telstra telstra.Internet NO
BigPond telstra.bigpond YES
Three (Postpaid) 3netaccess NO
Three (Prepaid) 3services NO
Vodafone (Postpaid) vfInternet.au NO
Vodafone (Prepaid) vfprepaymbb NO
Optus (postpaid)
DODO dodolns1 NO
WirelessBroadband NO
Virgin VirginBroadband NO
Primus primuslns1 NO
Crazy John purtona.net NO
Note: This table is up to date as of the printing of this manual
Using the 3G Router with a fixed line Broadband Internet Service (DSL/Cable)
Note: Before proceeding with this step, ensure that your WAN connection has been plugged into the WAN port of your 3G Router
To configure a non WAN connection (Static, DHCP, PPPoE, PPTP), please follow these steps:
• Mouseover Internet Settings and click on WAN
• Select your WAN Connection type from the dropbox (Static, DHCP, PPPoE, PPTP)
• Enter the relevant information on this screen as supplied by your ISP
• Click Apply to save the settings
• If everything is configured properly, the Status page will show that your WAN service is online and the WAN IP address that has
been assigned.
Non-3G connection status page:
connect NO
Optus (prepaid) preconnect NO
Blink splns888a1 NO