Nortel Networks T1 - Manual (Page 27)

YMLT1WN 3G Travel Router t1 User Guide
www.netcomm.com.au 27
NetComm Liberty Series - 3G Travel Router t1
Security
This page allows you to configure the wireless security for your 3G Router. Setting up sufficient wireless security can prevent unauthorised
access to your wireless network.
Name Description
SSID Choice: Select the SSID on which to configure the security settings
Security Mode: Select the security mode for the wireless network. See below for more information
Access Policy: This feature allows MAC Address Control, which prevents unauthorized clients from
accessing your wireless network. Select whether to allow/block users on the policy list, and
add their MAC addresses to the list on the format XX:XX:XX:XX:XX:XX
Click Apply to save the settings.
Security Mode
You may choose from the following wireless security options: Disabled, Open, Shared, WEPAUTO, WPA, WPA-PSK, WPA2, WPA2-PSK,
WPA-PSK-WPA2-PSK, WPA1-WPA2 or 802.1x.
Name Description
WEP: WEP (Wired Equivalent Privacy) is enabled by default to help prevent against unwanted
wireless users accessing your 3G Router. The default 64 bit Hexadecimal WEP key is:
a1b2c3d4e5