Nordic Star Products MFC-3420C - Manual (Page 132)

11 - 4 WALK-UP PHOTOCAPTURE CENTER ™ (MFC-3820CN ONLY)
The machine can only read one Media card at a time so do not insert
more than one card. The settings that you want to use with the card
will be kept until you take out the media card from the drive (slot),
print images or press
Stop/Exit .
1
Insert the media card firmly into the media drive (slot).
2
When you insert your media card
into the proper slot, the LCD shows.
3
Press PhotoCapture .
The LCD shows:
Do NOT unplug the power cord or remove the media card from
the media drive (slot) while the machine is reading or writing to
the card (the
PhotoCapture key is blinking). You will lose
your data or damage the card.
The media active message will be shown for 60 seconds and
then disappear. Even in that case, you can enter the
PhotoCapture mode by pressing
PhotoCapture .
(See Printing the Index
(Thumbnails) on page 11-5.)
(See Printing images on
page 11-6.)
C.Flash Active
Press PhotoCapture key...
Photo:Select
▲▼
Print Index
▲▼
Print Images
▲▼
Select