C.2 other logs, Other logs, Smart-ag logs in alphabetical order – Novatel GNSS Receiver and Antenna SMART-AG User Manual
Page 82
82
SMART-AG User Manual Rev 5
C.2 Other Logs
The SMART-AG firmware generates the logs in Table 16, in addition to those of the OEMV Family
log set. Refer to the OEMV Family Firmware Reference Manual, which also contains procedures and
explanations related to data logging and is available from our Web site at:
Table 16: SMART-AG Logs in Alphabetical Order
C.2.1
RADARSIGNAL ER Signal and Position Information
This log contains position and Emulated Radar (ER) signal information.
Message ID:
8193
Log Type:
Asynch
Recommended Input:
log radarsignala onchanged
ASCII Example 1 (stationary SMART-AG):
#RADARSIGNALA,COM1,0,61.5,FINESTEERING,1501,248381.628,00000000,8a1c,3723;
SOL_COMPUTED,WAAS,0.0139,0.00,0.00*f0d580ca
ASCII Example 2 (moving SMART-AG):
#RADARSIGNALA,COM1,0,42.5,FINESTEERING,1428,206179.600,00000000,baa8,3349;
SOL_COMPUTED,WAAS,0.3315,2,0.3152,473.97,29.62*c1479c20
Message ID
ASCII Log
Description
8193
RADARSIGNAL
Radar signal and position information
(New SMART-AG log)
37
VERSION
Hardware versions, software versions, and serial numbers (
Existing OEMV log extended to SMART-AG)