Introduction, 1 models and features, 1 introduction – Novatel GNSS Receiver and Antenna SMART-AG User Manual
Page 18: Smart-ag receiver, Chapter 1 introduction
18
SMART-AG User Manual Rev 5
Chapter 1
Introduction
The SMART-AG is a high-performance GNSS receiver and antenna, capable of receiving and
tracking different combinations of GPS L1 and GLONASS L1 code and carrier signals on a maximum
of 36 channels. SBAS (Satellite Based Augmentation Systems) includes WAAS, EGNOS, and MSAS.
SBAS support is standard. Refer to the GNSS Book, available from our Web site
, for an overview of each of the above signal types. The SMART-AG
rear panel also features light emitting diodes (LEDs) for status indication.
Once properly powered, the SMART-AG begins operating as a fully functional GNSS system. Figure
1 below shows the SMART-AG without connecting cables.
Figure 1: SMART-AG Receiver
1.1
Models and Features
The main features of the SMART-AG are:
•
an enhanced high performance GPS+GLONASS L1 receiver
•
a high performance GPS+GLONASS L1 antenna
•
emulated radar output
•
a CAN port
•
two (2) RS-232 COM ports
•
three (3) LED status indicators
•
a water and dust tight enclosure
•
Bluetooth wireless technology (optional)
•
tilt compensation (optional)