NEC MATWORX NWA-008862-001 - Manual (Page 53)

NWA-008862-001 Rev.2.1 Page 47
ajch3001.fm
CHAPTER 3 Office Data Converter
CHAPTER 3 Office Data Converter
In this chapter you learn about the following:
Office Data Converter Overview
Installing Office Data Converter
Uninstalling Office Data Converter
Connecting to PBX
Starting Office Data Converter
Exiting Office Data Converter
For details, refer to Office Data Converter Online Help. (Select
Help menu on the main menu screen.)
1. Office Data Converter Overview
What’s Office Data Converter?
To change the former system (NEAX2000 IVS,
NEAX1000 IVS, NEAX7400 ICS Model M110/
M120, NEAX7400 ICS Model M80VS/M100) to the
retrofit system (NEAX2000 IVS), you have to reset
the office data. This is because the office data
configuration of the former system is different from
that of the retrofit system and the office data of the
former system that has been used become unavailable.
Office Data Converter is a support tool to convert
automatically the office data configuration of the
former system to the configuration of the retrofit
system. Office Data Converter reads out the former
system office data and at the same time converts it to
the office data configuration of NEAX2000 IVS to
create a file in CSV form (comma delimiter).
The CSV-formatted file created by the Office Data
Converter can be set to the MP for the retrofit system
using “MACH Script Editor” of MATWorX for
NEAX2000 IVS.
1. Office Data Converter Overview