NEC MATWORX NWA-008862-001 - Manual (Page 21)

NWA-008862-001 Rev.2.1 Page 15
ajch1001.fm
CHAPTER 1 MATWorX
NOTE 2: The following procedure assumes that you
are starting the Setup program from your
computer’s CD-ROM drive D:. If you start
from a different drive, substitute the letter
of that drive in this procedure.
1. Launch Microsoft Windows on your PC.
2. Insert the MATWorX CD in the CD-ROM drive.
NOTE: If you set your PC starting the Setup
program of MATWorX automatically when
inserting a CD in the CD-ROM drive, the
Welcome dialog is displayed. At this time,
advance to step 6 (skip step 3 to 5).
3. Select Run from the Start taskbar.
4. A dialog similar to the following is displayed.
Run Dialog
5. Type D: Setup in the Open text box and click
OK button.
3. Installing MATWorX