NEC MATWORX NWA-008862-001 - Manual (Page 44)

Page 38 NWA-008862-001 Rev.2.1
ajch1001.fm
CHAPTER 1 MATWorX
6. Connecting to PBX
Using PBX Configuration Wizard
The PBX Configuration Wizard enables you to
establish the proper communication settings between
your PC and the PBX. The Wizard asks you simple
questions and then uses the information to
automatically configure the connection for the PC and
PBX. For details, refer to the MATWorX User Guide
that is an online manual of MATWorX. Select Help/
Manual../User Guide from the MATWorX Taskbar.
Establishing Connection
Once you have established communication settings
between your PC and a PBX, you can connect to a
PBX and disconnect from a PBX using MATWorX.
For details, refer to the MATWorX User Guide.
Troubleshooting a Failed Connection
Refer to the MATWorX User Guide; that describes
possible reasons for a failed connection between your
computer and a PBX, as well as actions required to
correct the problem.
6. Connecting to PBX