Nti nodemux series universal kvm switch 8, Rear view of st-8utso-r – Network Technologies ST-xU User Manual
Page 12
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH
8
Figure 9- Connect a PS/2 CPU to an ST-8UTS0-R
6. If the Touch-Screen Support option is installed, turn power ON to the monitor next. This will enable the NODEMUX to
initialize communications with the monitor and enable touch-screen support options when power is applied to NODEMUX in
step 7.
7. Turn power ON to the NODEMUX. The LED above button 1 on the front panel of the NODEMUX should illuminate. If
it doesn’t, see TROUBLESHOOTING.
Note: If the NODEMUX has the Touch Screen option installed, perform the "Reset Default Values" procedure as
described on page 20 before powering on attached CPUs.
8. Turn ON power to any or all CPUs connected to the NODEMUX.
FYI: If upon startup the monitor immediately displays a USER LOGIN menu requiring a USER NAME and PASSWORD,
then the administrator has already setup the system and enabled the OSD Security feature. Contact the administrator
for a login name and password. Then see page 10 for “User Login Mode” instructions.
PS/2 CPU
VKTINT-xx-MM
VEXT-xx-MM
MMEXT-xx
NTI
NETWORK
TECHNOLOGIES
INCORPORATED
Tel:330-562-7070
Fax:330-562-1999
1275 Danner Dr
Aurora, OH 44202
www.nti1.com
V
I
D
E
O
4
V
I
D
E
O
2
V
I
D
E
O
1
V
I
D
E
O
3
V
I
D
E
O
8
V
I
D
E
O
6
V
I
D
E
O
5
V
I
D
E
O
7
5VDC
2A
-
+
CPU 8
CPU 7
CPU 6
CPU 5
CPU 4
CPU 3
CPU 2
CPU 1
DEVICES
R
S
E
R
I
A
L
4
S
E
R
I
A
L
2
S
E
R
I
A
L
1
S
E
R
I
A
L
S
E
R
I
A
L
8
S
E
R
I
A
L
6
S
E
R
I
A
L
5
S
E
R
I
A
L
7
M
O
N
I
T
O
R
S
E
R
I
A
L
Rear View of ST-8UTSO-R