Network Technologies ST-xU - Manual (Page 10)

NTI NODEMUX SERIES UNIVERSAL KVM SWITCH
6
• SUN keyboard/mouse- plug the SUN keyboard directly into the DEVICES port.
Figure 5- Connect a SUN keyboard/mouse
4. For each CPU:
a. Connect the appropriate NTI keyboard cable (see the chart below) from the input devices port (keyboard/mouse)
of the CPU to a CPU x port of the NODEMUX. Note the port’s number. (See Figs. 6 and 7.)
b. Connect a VEXT-xx-MM video cable and video adapter, if needed (see the chart below), from the video port of the CPU to
the VIDEO x port of the NODEMUX with the same port number as the keyboard (see Figs. 6 and 7).
CPU Keyboard Cable Video Cable Video Adapter
PS/2 VKTINT-xx-MM VEXT-xx-MM None needed
SUN SKTINT-xx-MM VEXT-xx-MM 13W3M-15HDF
Note: Make sure the CPU is connected to a CPU x port and a VIDEO x port with the same number.
• PS/2 CPU- Connect a PS/2 CPU video port using a VEXT-xx-MM cable between a VIDEO x port on the ST-xU and the
CPU. Connect the PS/2 CPU keyboard and mouse ports using a VKTINT-xx-MM cable between a CPU-x port on the ST-xU and
the CPU.
Figure 6- Connect a PS/2 CPU
8 4 7 3 6 2 5 1 VIDEO VIDEO
NETWORK TECHNOLOGIES INC Tel:330-562-7070 1275 Danner Dr, Aur ora, OH 44202 www.nti1.com
Rear View of NODEMUX
CPU 4 CPU 3 CPU 2 CPU 1
CPU 8 CPU 7 CPU 6 CPU 5 DEVICES
MONITOR
R
S
2
3
2
DEVICES
8 Pin miniDIN Female
Connector
SUN Keyboard / Mouse
8 Pin miniDIN Male
Connector
PS/2 CPU
VKTINT-xx-MM
VEXT-xx-MM
ATTACH FIRST CPU TO PORT 1
(SHOWN HERE IS A PS/2 CPU)
15HD Male
Video Connector
8 Pin miniDIN Male
Connector
(GREEN-MOUSE)
(PURPLE-KEYBOARD)
6 Pin miniDIN Male
Connector
8 4 7 3 6 2 5 1 VIDEO VIDEO
NETWORK TECHNOLOGIES INC Tel:330-562-7070 1275 Danner Dr, Aurora, OH 44202 www.nti1.com
Rear View of NODEMUX
CPU 4 CPU 3 CPU 2 CPU 1
CPU 8 CPU 7 CPU 6 CPU 5 DEVICES
MONITOR
R
S
2
3
2