Nikon Coolpix S1100pj - Manual (Page 74)

60
Adjusting the A (Auto) Mode setting
More on
Sh
ooting
Preset Manual
Preset manual is effective with mixed lighting or to compensate for light sources
with a strong color cast (for example, to make pictures taken under a lamp with a
red shade look as though they had been taken under white light).
Follow the procedure below to measure the white balance value according to the
light source when shooting.
1
Place a white or gray reference object under the lighting that will be
used during shooting.
2
Tap the bottom tab to display the setting
controls (
A 16) and tap w.
3
Tap b.
The camera zooms in to the position for measuring white
balance.
4
Frame the reference object in the measuring
window.
To apply the most recently measured value for preset
manual, tap Cancel.
5
Tap Measure to measure a value for preset
manual.
The shutter is released and the new white balance value is
set. No picture is recorded.
B
Note on Preset Manual
A value for flash lighting cannot be measured with Preset manual. When shooting using the flash,
set White balance to Auto or Flash.
OFF OFF OFF AUTO AUTO AUTO
0.0 0.0 0.0 AUTO AUTO AUTO
White balance
Preset manual
Preset manual
Cancel
Measure
Measuring window
Preset manual
Cancel
Measure