Nikon Coolpix S1100pj - Manual (Page 167)

153
Setup Menu
Basi
c Came
ra Setup
k Auto Off
When the camera is on and a period of time passes without any operations having
been performed, the monitor will be turned off and the camera will enter standby
mode (
A 21) to save power.
In this option, set the time allowed to elapse before the camera enters standby
mode. 30 s, 1 min (default setting), 5 min, and 30 min can be selected.
C
When the Monitor Turns off for the Power Saving Function
• Power-on lamp blinks in standby mode.
• Camera turns off after three minutes passes in standby mode.
• To reactivate the monitor while the power on lamp is blinking, press any of the following buttons:
- The power switch, shutter-release button, A button, or b (movie-record) button
C
Auto Off Settings
The time allowed to elapse before the camera enters standby mode is fixed in the following
situations:
• When a setting screen, mode selection menu, or setup menu is displayed: three minutes
• During slide show playback: up to 30 minutes
• When the AC adapter EH-62F is connected: 30 minutes
C
Auto Off in Projector Mode
Use the Auto off ( A 173) option in the projector settings menu to specify the auto off setting for
projector mode.
Tap the bottom tab ( A 143) M Tap z (Setup menu) M k Auto off