Vibration reduction, G vibration reduction, A 150) i – Nikon Coolpix S1100pj User Manual
Page 164: A 150) to, A 150) t, A 150), A 150
150
Setup Menu
Basi
c Came
ra Setup
g Vibration Reduction
Choose a vibration reduction option for shooting.
Vibration reduction reduces blur caused by slight hand movement known as
camera shake, which commonly occurs when shooting with telephoto zoom
applied or at slow shutter speeds. The effects of camera shake are reduced when
recording movies, in addition to when taking still pictures.
Set Vibration reduction to Off when using a tripod to stabilize the camera
during shooting.
The current vibration reduction setting can be confirmed in the camera monitor
with shooting (
A 12, 27). When Off is selected, no icon is displayed.
Tap the bottom tab (
A 143) M Tap z (Setup menu) M g Vibration reduction
On (hybrid)
The effects of camera shake are reduced optically using a lens-shift method.
Additional image processing with electronic vibration reduction is applied to
further reduce the effects of camera shake with recording of still pictures taken
under the following conditions.
• When the flash does not fire
• When a shutter speed slower than 1/60 seconds is used
• When Self-timer is disabled
• When Continuous is set to Single
• When ISO sensitivity is set to 200 or less
On (default setting)
The vibration reduction using the lens-shift method only is enabled.
Off
Vibration reduction is not enabled.