Nikon Coolpix S1100pj - Manual (Page 146)

132
Connecting to a Computer
Con
n
e
cti
ng t
o
Te
le
vi
sion
s, Comp
u
te
rs
a
n
d
Pr
in
te
rs
Transferring Images from a Camera to a Computer
When transferring images to the computer from the camera, select the Interface
setting (
A 155) from the setup menu and set the USB option to MTP/PTP.
• The default setting is MTP/PTP.
1
Start the computer to which ViewNX 2 was installed.
2
Be sure that the camera is off.
3
Connect the camera to the computer using the supplied USB cable.
Be sure that connectors are properly oriented. Do not attempt to insert connectors at an
angle, and do not use force when connecting or disconnecting the USB cable.
.
4
Turn on the camera.
The power-on lamp will light. The camera monitor will
remain off.
B
Connecting the USB Cable
The connection may not be recognized if the camera is connected to the computer via a USB hub.