Nortel Networks NN46200-301 - Manual (Page 7)

7
Preface
The Nortel Ethernet Routing Switch 8300 is a flexible and multifunctional
Layer 2/Layer 3 switch that supports diverse network architectures and
protocols. The Ethernet Routing Switch 8300 provides security and control
features such as Extensible Authentication Protocol over LAN (EAPoL),
Simple Network Management Protocol, Version 3 (SNMP3), and Secure
Shell (SSH). The Ethernet Routing Switch 8300 provides quality of service
(QoS) for a high number of attached devices and supports future network
requirements for QoS for critical applications, such as Voice over IP (VoIP).
This guide is intended for qualified service personnel who need to add or
replace an AC power supply in an Ethernet Routing Switch 8300 Series
chassis. A qualified service person should have appropriate technical
training and experience and be aware of the hazards involved in installing
and replacing customer-replaceable units.
This guide provides information about the AC power supply used in the
Ethernet Routing Switch 8300 Series chassis and instructions for adding
and replacing an AC power supply in the following Ethernet Routing Switch
8300 Series chassis models:
• Ethernet Routing Switch 8306 chassis
• Ethernet Routing Switch 8310 chassis
Command line interfaces
See the following sections for information about the CLI and the NNCLI.
NNCLI command modes
The NNCLI has four major command modes, listed in order of increasing
privileges:
• User EXEC
• Privileged EXEC
• Global configuration
• Interface configuration
Nortel Ethernet Routing Switch 8300
Installation — AC Power Supply
NN46200-301 03.01 Standard
4.0 27 August 2007
Copyright © 2007, Nortel Networks
.