Nortel Networks NN46200-301 - Manual (Page 20)

20 Power supply installation
7 Turn on the power switch.
The power supply LED on the power supply should light green.
—End—
Removing the AC power supply
DANGER
Due to high-energy hazards of working with components of greater
than 240 VA, only qualified service personnel are permitted to
install and replace Ethernet Routing Switch 8300 components.
You can remove a redundant power supply without affecting the operation
of the Ethernet Routing Switch 8300 Series switch. When you remove a
power supply, the LED on the power supply turns off, and the Ethernet
Routing Switch 8300 Series Chassis automatically redistributes the load to
the remaining power supplies.
Nortel Ethernet Routing Switch 8300
Installation — AC Power Supply
NN46200-301 03.01 Standard
4.0 27 August 2007
Copyright © 2007, Nortel Networks
.