NETGEAR ProSafe Wireless Access Point WG102 User Manual
Page 21
XEPS103 Space-Saving Powerline Network Extender User Guide
13
v1.0, February 2007
If the Power LED still does not come on, and you have confirmed the power outlet is live, you
have a hardware problem and should contact technical support.
HomePlug Light Not On
If the power light is on but the HomePlug light is not, check the following:
•
Make sure that power is being provided to more than one PowerLine device. Another
PowerLine device must be installed for successful communication across the PowerLine.
•
Verify that the network password is the same on all devices in the PowerLine network.
Ethernet Light is Off
•
Make sure that the Ethernet cable is plugged in properly to a router LAN port.
•
On the attached Ethernet device or network adapter card, check that the Link light is on.