4 routing – NetComm N300 User Manual

Page 52

Text mode
Original mode

ADSL2+ Wireless N300 Modem Router with VoIP User Guide

YML9WMAXXN

www.netcomm.com.au

8.4 Routing

8.4.1 Default Gateway

If the Enable Automatic Assigned Default Gateway checkbox is selected, this router will accept the first received default gateway
assignment from the DHCP enabled PVC(s). If the checkbox is not selected, enter the static default gateway and/or WAN interface. Click
Save/Apply.

NOTE:

After enabling Automatic Assigned Default Gateway, you must click the Save/Apply button to put it into effect. The router will reboot.

8.4.2 Static Route

This screen lists the configured static routes and allows for the configuration of static routes. Choose Add or Remove to configure the static
routes.

To add static route, click the Add button to display the following screen. Enter the destination network address, subnet mask,
gateway AND/OR available WAN interface then click Save/Apply to add the entry to the routing table.